Rapid screening of DON contamination in whole wheat meals by Vis/NIR spectroscopy and computer vision coupling technology

This work intends to develop an online experimental system for screening of deoxynivalenol (DON) contamination in whole wheat meals by visible/near-infrared (Vis/NIR) spectroscopy and computer vision coupling technology. Spectral and image information of samples with various DON levels was collected at speed of 0.15 m s⁻¹ on a conveyor belt. The two-type data were then integrated and subjected to chemometric analysis. Discriminant analysis showed that samples could be classified by setting 1000 μg kg⁻¹ as the cut-off value. The best correct classified rate obtained in prediction was 93.55% based on fusion of spectral and image features, with reduced prediction uncertainty as compared to single feature. However, quantification of DON by quantitative analysis was not successful due to poor model performance. These results indicate that, although not accurate enough to provide conclusive result, this coupling technology could be adopted for rapid screening of DON contamination in cereals and feeds during processing.     

Application of bio-based dimer acid diglycidyl ester in paper-based copper clad laminate

Using dimer acid (DA) as raw material, DA diglycidyl ester (DADGE) was synthesized and used as reactive toughening agent to prepare paper-based copper clad laminate (p-CCL). The factors affecting the epoxy value of DADGE and the effect of the resin on the gelation time were studied. The effects of the epoxy value and the addition amount of DADGE on the solderleaching resistance, flammability, water absorption, bending strength, and impact strength of the p-CCL were discussed. The results showed when the molar ratio of DA to ECH was 1:8 and the molar ratio of DA to sodium hydroxide was 1:1.6, the epoxy value of DADGE reached the maximum value of 0.23 mol/100 g. The DADGE can shorten the gelation time of the glue. The p-CCL meets the performance of the IPC-TM-650 standard. And when the addition amount of DADGE is less than 12 wt %, the flammability of the p-CCL reaches UL94V-0 level. The p-CCL prepared by adding 6 wt % of DADGE with 0.08 mol/100 g epoxy value has the best comprehensive performance, its toughness and rigid are comparable to those of p-CCL with 12 wt % of commercially available high performance toughening agents and it has higher solderleaching resistance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47508.     

A fuzzy logic PI control with feedforward compensation for hydrogen pressure in vehicular fuel cell system

In a vehicular fuel cell system, alternative load and frequent purge action can lead to anode pressure varies with the hydrogen mass flow fluctuation. It's crucial to control the pressure difference between anode and cathode within a reasonable range to avoid adverse phenomena such as membrane failure, reactant starvation, or even water management fault. In this paper, an improved proportional integrative (PI) controller by the fuzzy logic technique that considers the engineer experience and knowledge on the hydrogen supply system behavior is proposed for hydrogen pressure control, in which the PI parameters are tuned by a fuzzy decision process. Furthermore, load current and purge action regarded as input disturbances are applied for feedforward compensation to reduce the pressure response hysteresis. A hydrogen supply subsystem based on the proportional valve is modeled, and corresponding parameters are determined by analyzing the response time and steady pressure fluctuation. The performance of the conventional PI controller, the fuzzy logic PI (FLPI) controller and fuzzy logic PI with feedforward (FLPIF) controller is validated. The presented results indicated that the FLPI controller significantly improves the dynamic response of hydrogen pressure compared to the PI controller, and the FLPIF controller can further reduce overshoot caused by disturbance. Finally, the proposed FLPIF controller is implemented on a rapid prototype platform of the hydrogen supply subsystem and an actual fuel cell system, exhibiting satisfactory performance.     

Facile access to carboxyl-terminated polybutadiene and polyethylene from cis-polybutadiene rubber

Carboxyl-terminated polybutadiene (CTPB) is a widely used telechelic liquid rubber, which is mainly prepared by anionic or free-radical polymerization of 1,3-butadiene. It is known that the microstructure of liquid polybutadiene rubber largely affects its processability and mechanical properties. However, it is hard to control its microstructure in the free radical or anionic polymerization. In this study, a series of CTPB with high cis-1,4 content has been prepared for the first time via the oxidolysis and selective oxidation of cis-polybutadiene rubber (BR). Hydrogenation of their CC double bonds with p-toluenesulfonyl hydrazide/tri-n-propylamine (TSH/TPA) reagents afforded carboxyl-terminated polyethylenes (CTPE). For comparison, commercial CTPB (FCTPB), prepared by free-radical polymerization of 1,3-butadiene, was also hydrogenated and gave FCTPE with more ethyl branches. Linear CTPE (L-CTPE) was synthesized by ring-opening metathesis polymerization of 1,5-cyclooctadiene in the presence of maleic acid and subsequent hydrogenation. The microstructure of the polymers was established by FT-IR, ¹H NMR, ¹³C NMR, and GPC and their thermal properties were determined by DSC and TGA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46934.     

Remarkable Antibacterial Activity of Reduced Graphene Oxide Functionalized by Copper Ions

Despite long-term efforts for exploring antibacterial agents or drugs, potentiating antibacterial activity and meanwhile minimizing toxicity to the environment remains a challenge. Here, it is experimentally shown that the functionality of reduced graphene oxide (rGO) through copper ions displays selective antibacterial activity that is significantly stronger than that of rGO itself and no toxicity to mammalian cells. Remarkably, this antibacterial activity is two-orders-of-magnitude greater than the activity of its surrounding copper ions. It is demonstrated that rGO is functionalized through the cation–π interaction to massively adsorb copper ions to form a rGO–copper composite and result in an extremely low concentration level of surrounding copper ions (less than ≈0.5 µm ). These copper ions on rGO are positively charged and strongly interact with negatively charged bacterial cells to selectively achieve antibacterial activity, while rGO exhibits the functionality to not only actuate rapid delivery of copper ions and massive assembly onto bacterial cells but also result in the valence shift in the copper ions from Cu²⁺ into Cu⁺, which greatly enhances the antibacterial activity. Notably, this rGO functionality through cation–π interaction with copper ions can similarly achieve algaecidal activity but does not exert cytotoxicity against neutrally charged mammalian cells.     

The thermochromic characteristics of Zn-doped VO2 that were prepared by the hydrothermal and post-annealing process and their polyurethane composite films

In this paper, Zn-doped VO₂ nanoparticles have been successfully fabricated by a two-step hydrothermal-annealing process, and the thermally induced visible light transmittance enhancement of Zn-doped VO₂ has been studied for the first time. It is found that Zn-doped VO₂ not only exhibits excellent solar modulation ability (ΔT_sol = 15.27%) but also can reduce the phase transition temperature and increase the visible light transmittance after the heat-induced phase transition (ΔT_lum=+5.78%). Moreover, with the increase of Zn doping concentration, the phase transition temperature (T_c) and phase transition hysteresis (ΔT) both decrease. It is shown that the Zn-doped VO₂-PU films not only have good solar light modulation ability and properties of improving visible light transmission after phase transition, but also have good durability. The research result is of great significance for improving the visible light transmittance after phase transition and realizing the practical application of VO₂ in the field of smart windows.     

180 t转炉高废钢比冶炼工艺开发

通过对转炉炼钢过程的平衡计算结果进行分析,得出了提高废钢比的措施:减少渣量,减少冷却剂用量和添加升温材料等。结合理论计算和生产实践,减少1 kg/t炉渣可提高废钢比0.10%,减少1kg/t冷却剂可提高废钢比0.19%,增加1kg/t无烟煤可提高废钢比0.27%,增加1 kg/t清洁升温剂可提高废钢比0.41%,工艺优化后转炉废钢比可由17.0%提高到23.1%以上。     

基于分段加权的反向稀疏跟踪算法研究

为提高稀疏表示跟踪模型性能，提出一种分段加权的反向稀疏跟踪算法，将跟踪问题转化为在贝叶斯框架下寻找概率最高的候选对象问题，构造不同的分段权重函数来分别度量候选目标与正负模板的判别特征系数。通过池化来降低跟踪结果的不确定性干扰，选择正负模板加权系数差值最大的候选表示作为跟踪结果。实验表明，在光照变化、遮挡、快速运动、运动模糊情况下，所提出的算法可以确保跟踪结果的准确性和鲁棒性。